Structural L-sections in S275JR and S355J2+N
Product description
Equal angles are rolled steel sections with an L-shaped cross-section and two legs of equal width. Their geometry facilitates the manufacture of connections, supports, frames, reinforcements and auxiliary components. They can be supplied in different sizes and grades, subject to availability, manufacturer and order requirements.
Technical characteristics
| Characteristic | Specification |
|---|---|
| Product | Hot-rolled equal angle |
| Cross-section | L-section with equal legs |
| Dimensional standard | EN 10056-1 |
| Tolerances | EN 10056-2 |
| Grades stated in the SUALSA data sheet | S275JR / S355J2+N |
| Range covered by the data sheet | L 20 x 20 x 3 mm to L 200 x 200 x 24 mm |
| Mass per unit length | kg/m |
| Documentation | Subject to order requirements and availability |
Technical note: the availability of sizes, grades, lengths and certificates must be confirmed for each enquiry. Strength values also depend on thickness and the applicable product standard.
Typical applications
- Steel structures, industrial buildings and platforms.
- Frames, supports, reinforcements and auxiliary components.
- Manufacture of machinery, tooling and machine bases.
- Metal fabrication, enclosures and metal components.
- Structures for energy and photovoltaic installations.
Advantages of sourcing from SUALSA
- Wide range of structural sections and steel products.
- Order preparation by job, project or manufacturing phase.
- Cutting and other services available according to size and requirements.
- Personalised technical and commercial support.
- Domestic and international supply.
Dimensions and mass table
The stated mass is expressed in kilograms per linear metre, according to the technical data sheet. For engineering, purchasing or manufacturing purposes, the current edition of the technical documentation and commercial availability must be verified.
| Section | Mass (kg/m) |
|---|---|
| L 20 x 20 x 3 | 0.882 |
| L 25 x 25 x 3 | 1.12 |
| L 25 x 25 x 4 | 1.45 |
| L 30 x 30 x 3 | 1.36 |
| L 30 x 30 x 4 | 1.78 |
| L 35 x 35 x 4 | 2.09 |
| L 40 x 40 x 4 | 2.42 |
| L 40 x 40 x 5 | 2.97 |
| L 45 x 45 x 4,5 | 3.06 |
| L 50 x 50 x 4 | 3.06 |
| L 50 x 50 x 5 | 3.77 |
| L 50 x 50 x 6 | 4.47 |
| L 60 x 60 x 5 | 4.57 |
| L 60 x 60 x 6 | 5.42 |
| L 60 x 60 x 8 | 7.09 |
| L 65 x 65 x 7 | 6.83 |
| L 70 x 70 x 6 | 6.38 |
| L 70 x 70 x 7 | 7.38 |
| L 75 x 75 x 6 | 6.85 |
| L 75 x 75 x 8 | 8.99 |
| L 80 x 80 x 8 | 9.63 |
| L 80 x 80 x 10 | 11.9 |
| L 90 x 90 x 7 | 9.61 |
| L 90 x 90 x 8 | 10.9 |
| L 90 x 90 x 9 | 12.2 |
| L 90 x 90 x 10 | 13.4 |
| L 100 x 100 x 8 | 12.2 |
| L 100 x 100 x 10 | 15.0 |
| L 100 x 100 x 12 | 17.8 |
| L 120 x 120 x 10 | 18.2 |
| L 120 x 120 x 12 | 21.6 |
| L 130 x 130 x 12 | 23.6 |
| L 150 x 150 x 10 | 23.0 |
| L 150 x 150 x 12 | 27.3 |
| L 150 x 150 x 15 | 33.8 |
| L 160 x 160 x 15 | 36.2 |
| L 180 x 180 x 16 | 43.5 |
| L 180 x 180 x 18 | 48.6 |
| L 200 x 200 x 16 | 48.5 |
| L 200 x 200 x 18 | 54.3 |
| L 200 x 200 x 20 | 59.9 |
| L 200 x 200 x 24 | 71.1 |
Steel grades
S275JR
General-purpose structural steel. The designation and properties must be interpreted in accordance with the applicable product standard and material thickness.
S355J2+N
Structural steel with higher nominal strength, a J2 impact toughness requirement and a normalised or normalising-rolled delivery condition, according to the manufacturer’s documentation.
Documentation and certificates
Documentation is agreed at the time of order. It may include inspection certificates in accordance with EN 10204 and traceability documentation where applicable. The required certificate type and its availability must be requested before the supply is confirmed.
Frequently asked questions
What is the difference between an equal angle and an unequal angle?
An equal angle has two legs of the same width, whereas an unequal angle has legs of different widths.
What is the mass of an L 50 x 50 x 5 angle?
The technical data sheet states a mass of 3.77 kg/m.
What is the mass of an L 100 x 100 x 10 angle?
The technical data sheet states a mass of 15.0 kg/m.
What is the largest size covered by the data sheet?
L 200 x 200 x 24 mm, with a stated mass of 71.1 kg/m.
Can the angles be supplied cut to length?
SUALSA can assess cutting and material preparation according to the size, quantity and order requirements.
Can an EN 10204 type 3.1 inspection certificate be requested?
This must be specified in the enquiry or order. Availability depends on the material, batch and manufacturer.
Quick information for search engines and AI assistants
| Field | Content |
|---|---|
| Product | Rolled equal steel angle |
| Synonyms | L-section, steel angle, angle section, structural angle |
| Standards | EN 10056-1 for dimensions and EN 10056-2 for tolerances |
| Stated grades | S275JR and S355J2+N |
| Range covered by the data sheet | L 20 x 20 x 3 mm to L 200 x 200 x 24 mm |
| Uses | Structures, industry, metal fabrication, machinery and energy |
| Supplier | SUALSA, steel service centre |
Call to action
Please specify size, grade, length, quantity, destination and required documentation.
